Last year I purchased a Bass Hunter (2-man plastic boat), and started planning on how to rig it out. I saw FFM.com mentioned on an on-line fishing forum, and looked up their website. I have since purchased the 10/20ah 7.5" battery control mount with the clamp mount, and the GEN 2 Pole Arm Mount for my Lowrance transducer. Both products are perfect for the intended use, and fit my boat to a tee. What I like the best about these products is that with the clamps, they can be removed and installed on another vessel, like my kayak, for example. And, I don't like the idea of drilling holes in a plastic boat anymore than I have to. I am now ordering the quick release bracket for the battery pack, so that I can remove the battery and charge it anywhere I have an electrical outlet. Wade and the guys at FFM.com have been very helpful when I have called to ask questions, and shipping takes less than a week to Texas. Very utile products!

at first i was not sure so i e-mailed them a question and they returned it quickly with all there recommendations. so i ordered everything i needed it was perfect. there customer service was great. i highly recommend these guys for any mounts.

just got my mount in the mail for my livescope and have to say it seems pretty amazing. haven't used it yet but it's a huge upgrade from what I already have. I ordered all the lil extra stuff and happy I did, it's pretty expensive well just getting livescope is but u can't stop there gotta do it right either way I don't think u can beat this mount . can't wait to get on the water especially this fall sucker fishing for musky , gonna be a game changer

I recently purchased two (2) Pontoon Down-rigger Mounts for my new Suntracker Sportfish 22 XP3. Today I finished installing both mounts, took about an hour a piece (most of that time was fit checking) as once you settle on the correct spot, you simply tighten six (6) hex head bolts and your done! I used the two extra bolts on the side of the mount as I didn’t need to drill through my fence to do it. I must admit I was skeptical at first, but these mounts are as (or better) strong and sturdy as anything available on the market! I will be back for more mounts as I’m adding a Fish Finder up front and will mount the Transducer to my Minn Kota Trolling Motor. Having started my career as a Machinist, I know quality work when I see it and for the money, you can’t beat these guys!

I don't often write reviews but the pontoon boat rail mount I recently purchased greatly exceeded my expectations. The unit was perfectly constructed and fit the boat like a glove, positioning my fish finder securely right where I want it. I have already recommended you guys to several people inquiring where I got the mount. Impressive product.

I bought a non-powered float tube mount for my Garmin Striker 4. The mount is less complex, lighter and work better than the improvised set up I had previously. Works perfectly and easy to install.

I spent a lot of time looking at the various pole-mount options offered by all the manufacturers. I wanted something that would allow me to assemble a portable solution that I could quickly and easily mount and remove from my microskiff, on the rare occasions I wanted a fishfinder along for the ride. I like to fabricate my own gear when possible and figured I would get some ideas from the existing DIY solutions folks have posted online, along with stealing ideas from the commercial offerings. I quickly zeroed-in on the solutions by Fishfinder Mounts as being the closest to what I thought I wanted. I eventually came to the conclusion that with the high cost of aluminum and the various components I would need, and all the time it would take to start machining my own parts, that I would just bite the bullet and spend the big bucks on a complete finished kit. Sure, a quick and dirty solution using aluminum extrusions and pvc was an option, but I decided I didn’t want to go that route. I have to say, even given the high cost, I’m thoroughly impressed with the quality of the mounts and components. I have an obsession with high-quality items with fine machining and great fit and finish. These products did not disappoint, and once having them in my hands it was far easier to justify the cost in my mind. Actually hurt just a little during assembly and thinking about putting them into use since that perfect anodizing and scratch-free surfaces would not stay that way. Really, not a sharp edge, pit, or nicked corner anywhere. You can tell that the owner/designer has an appreciation for finely engineered and perfectly machined assemblies like I do. At the moment the only thing I can think of that I wish they had in the product line is a mount specific to the Lowrance ActiveTarget transducer (& Hummingbird) like they have for the Garmin LiveScope. Having to use the bulky factory Lowrance mount with poor adjustability isn’t a good fit with an expensive and otherwise perfect setup. RyTek has a crazy expensive machined aluminum mount, or Summit Specialties has a cheap 3D printed mount. My 3D printer is giving me fits so I ordered their mount, and drilled and modified the “non-perspective cylinder” mount that came with my FishFinder Mounts purchase. The Summit Specialties mount design seems like a good one, although the 3D printed components may not hold-up long-term exposed to the sun day in and day out. I don’t have that durability concern about the components from FishFinder Mounts.

What an awesome experience. I emailed them with a problem I had (stern-mounted transducer getting knocked about in shallow water) and they identified a solution and the appropriate products to achieve it. Now I have a rail-mounted, pivoting transducer arm that I can easily drop in when I'm finishing and pull up when I'm navigating the shallows. Their passion for the product shows through in the exceptional quality and customer follow-up. I even accidentally ordered the wrong bracket type and they facilitated an exchange to get me the correct one. Would 100% recommend these guys to anyone with any sort of fish finder mount needs.

Wow! Wow! Wow! I ordered the Gen2 transducer arm and pole kit and it is top quality. I have gone through 2 of those plastic kayak transducer arms in the past 2years. This arm is exactly what I was looking for. Quality product and top quality customer service. Thanks